Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair), Type 2 pack-ducati-oem-turn-signal-y-splitter-connectors-2-wire-pair-3 Installation of the ELFR-P is

Installation of the ELFR-P is as follows:

Built-in 2 Watt Load Equalizer helps prevent the no-blink or 4-way blink condition

The ground wire with loop connector must be connected to a common ground point

General Blaster-X Tail Light Programming instructions are available here

Yamaha OEM Turn Signal Y-Splitter Connectors, 3-Wire (pair), Type 2 pack-ducati-oem-turn-signal-y-splitter-connectors-2-wire-pair-3 Installation of the ELFR-P isAllows for 2 turn signal lamps to be connected to each turn signal circuit. Increase turn signal visibility with two sets of lamps, such as: Integrated turn signals and auxiliary or OEM turn signals. Typically used for front and rear turn signal connectors on some Yamaha motorcycles. Fits multiple years models confirm individually. Comes with 6" long 22AWG wires between connectors. Protective sheathing prevents chafing. Sold as pairs (two per order).