Wilwood Rotor-SRP48 SPC-37-LH-BLK-Drill 13.06 x 1.25 - 12 on 8.75in Exhaust- Mufflers & Tips>Smoke Stacks BMR manufactures its MM300 polyurethane

BMR manufactures its MM300 polyurethane motor mounts in its Florida facility from MIG-welded -inch plate steel with 6061 billet aluminum machined spacers and 95-durometer polyurethane bushings

tuned and dyno-tested to fit specific Honda Civic models

performance gains and enhanced fuel economy all with an easy bolt-on installation

This pair of lower control arms are direct replacements for weak or bent factory units

Wilwood Rotor-SRP48 SPC-37-LH-BLK-Drill 13.06 x 1.25 - 12 on 8.75in Exhaust- Mufflers & Tips>Smoke Stacks BMR manufactures its MM300 polyurethaneSRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build up on the rotor faces resulting