Simpson MBHU5.50/18KT Masonry Beam Hanger 5-1/2x18 in 10-Ga G90 Galv w/Anchors and Screws Rebar Tools No additional welding is allowed

No additional welding is allowed

Simpson GDP-100KT GDP 1 in

Crescent washers are supplied with the HGT-2 to allow for adjustability during installation

These collated DSV screws install with the Simpson Strong-Tie Quik Drive PRO200SG2

Simpson MBHU5.50/18KT Masonry Beam Hanger 5-1/2x18 in 10-Ga G90 Galv w/Anchors and Screws Rebar Tools No additional welding is allowedThe Simpson Strong Tie MBHU5. 50 18KT MBHU 5 1 2 in. x 18 in. Galvanized Masonry Beam Hanger with Screws Anchors is a face mounted connector designed for attaching beams to masonry or concrete walls. This non welded, one piece connector is suitable for solid sawn and engineered wood beams as well as trusses, and comes complete with the Titen HD screw anchors and Strong Drive SDS Heavy Duty Connector screws needed for installation. Because the Titen HD