19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin The bronze version was included

The bronze version was included in all Furlex A

a must when poling out a large genoa or a gennaker

Dimensioned for a righting moment at 30° heel of maximum 550 kNm on a masthead rigged monohull yacht and 450 kNm on a fractional rig

The System 22 Jib Car Kit is a set of two 500 mm tracks

19 thread Standard Wire with eye terminal, ø14 mm, Length 20,4 m, Furlex 400S/E/TD ø11 mm Clevis Pin The bronze version was includedThe original wire for Furlex 400S E and TD. 1x19 strands, AISI 316 stainless steel. The purpose of the plastic tube at the top end is to center the wire in the luff extrusion and prevent chafe between wire and top extrusion. This bearing is permanently fixed with a talurit. The newer Furlex models, of the 4th generation, has a purpose made top guard and do not need the roller. Our recommendation is that the forestay wire is replaced after 20000