svetsbar dragogla 40mm 30mm tjock med skaft 65x56mm fran scharmuller 7583 491_9_6068HL475 Rated for vertical load 760kg

Rated for vertical load 760kg up to 40km/h and 550 kg over 40 km/h

corresponds to reference no: L156433 and L219471

Add-on to get forced control on both sides for bolt-on K80 Scharmüller pull

The plate is 160x160x30mm with 8 M16 holes

svetsbar dragogla 40mm 30mm tjock med skaft 65x56mm fran scharmuller 7583 491_9_6068HL475 Rated for vertical load 760kgApproved according to E1 55R 01 3067. Total length 390 mm, of which 137. 5 mm is weldable. The square part of the tow bar has a cross section of 65x56mm. Rated for vertical load 1350 kg. To achieve this, it must be welded with 4 weld seams that are at least 130mm long and 8mm wide. Y4220 is the recommended electrode. Must be heated to 250 C before welding (according to DIN 74054). and the tow bar should heat