System Sensor EOLR-1 4-Wire Device Required Relay murphy tube The camera comes pre-configured to

The camera comes pre-configured to securely operate with the Eagle Eye Networks

The PowerG Wireless Temperature Detector PG9905

36mA (12V In)

C4WTA-BA: ULC Listed

System Sensor EOLR-1 4-Wire Device Required Relay murphy tube The camera comes pre-configured toGENERAL DESCRIPTION Model EOLR 1 is an epoxy encapsulated single pull single throw (SPST) normally open relay that is activated by 9 to 40 VDC. This relay can be used as an end of line device in fire alarm systems, e. g., to supervise power supplies. MOUNTING For ease of installation, the EOLR 1 relay may be mounted in a variety of ways. It can be attached to equipment or inside an enclosure using the mounting screw or double sided tape. WIRING NOTE: