Coilover Suspension Stance - MTSGWBM01-S Volkswagen > Golf > MK6 > GTI we decided to re-engineer the

we decided to re-engineer the rear control arm to what it should have been in the first place

which will not effect  the way the vehicle drives

Torque went from 222 lb/ft to 244 lb/ft - an increase of 22 lb/ft

We have seen this change on vehicles that are produced post 2016 so please make sure to check before you purchase your Forge valve

Coilover Suspension Stance - MTSGWBM01-S Volkswagen > Golf > MK6 > GTI we decided to re-engineer the2 Front and rear axle height adjustable (threaded shock absorber housing)., 8 Not for 4x4., 21 If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 During the installation of suspension set the clearance between tire rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.